HDMI - VGA Scaler Kramer VP-426H2

Liên Hệ

VP−426H2 is a high−performance digital scaler for HDMI and computer graphics/HDTV signals. The unit up− or down−scales computer graphics and HDTV signals to resolutions up to 4Kx2K. Over 25 output resolutions and native are supported. The user selects the computer graphics/HDTV or HDMI input and the scaled output is sent to both the computer graphics and HDMI outputs.

Max. Resolution — 4K@60Hz (4:4:4).
Standards Compliance — HDMI 2.0, HDCP 2.2/1.4.
EDID Handling — Reading and storage of acceptor's EDID.
Inputs — VGA (RGBHV), Component (YPrPr) or HDMI.
Outputs — Simultaneous RGBHV and HDMI.
Input Auto–Scanning.
Constant Sync — Maintains sync on the output, even if input video signal is lost or interrupted.
Analog/Embedded Audio Support — For inputs and outputs.
Built–in ProcAmp — For convenient signal adjustment.
On–Screen Display (OSD) — For easy setup and adjustment, accessible via the front–panel buttons.
Non–Volatile Memory — Retains last settings used.
Freeze Button.
Contact Closure — For remote switching of sources.
USB Port — For upgrading firmware.

Bảo Hành:

12 Tháng

Tình Trạng

: Đang Có Hàng

Nhà Sản Xuất

: AV over IP and AV Tools

INPUTS

1 PC/HD (RGBHV/YPbPr): On a 15–pin HD connector
1 HDMI: On a female HDMI connector
2 unbalanced stereo audio connectors: On 3.5mm mini jacks

OUTPUTS

1 PC (RGBHV): On a 15–pin HD connector
1 HDMI: On a female HDMI connector
1 unbalanced stereo audio: On a 3.5mm mini jack

VIDEO

Output Resolutions: 480p*, 640x480@60Hz, 576p*, 800x600@60Hz, 720p@50/60Hz*, 1024x768@60Hz, 1280x768@60Hz, 1360x768@60Hz, 1280x800@60Hz, 1440x900@60Hz, 1280x1024@60Hz, 1400x1050@60Hz, 1680x1050@60Hz, 1080P@24/25/30/50/60Hz*, 1600x1200@60Hz, 1920x1200RB@60Hz, 4K@24/25/30/50/60Hz**
*: The VGA output is in RGB colorspace
**: 4K resolutions are available on the HDMI output only
Output Refresh Rate: 60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions
Latency: Progressive input: 30ms (approx.), interlaced input: 50ms (approx.)